Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #26  
Old 12-15-2015, 11:56 PM
Registered User
 
Join Date: Nov 2010
Location: Huntington NY
Posts: 66
Bob,
I have been following this since it's inception because I own two M103's.
I'm not an expert but I am learning.
The reading at #2 and #3 should fluctuate from 6-7v Dc
11.6v DC is nearly dead battery, put it on a charger.
What spark plugs are you running?
Do you have continuity at the micro switch, and to test TPS, continuity at terminal #2 and ground on the 4 pole above the coaxial on the EZL?
Check the wiring at the TPS.
Were the injectors replaced with the seals, if not how old are they?
What vacuum is present at a manifold nipple?
I just went through this on my 92, wanted to roll it outside and shoot it.
Fixed it, TPS misaligned.
I feel your pain.
Don't give up

Paul

Last edited by 124126140; 12-16-2015 at 12:10 AM.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:09 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page