|
|
|
#1
|
|||
|
|||
190e engine re-build HELP!
Hi guys. I am about to re-assemble my 1985 190e 2.3L 8V. I have replaced almost everything inside the engine.. camshaft, valves, rocker arms, seals, rings, bearings, etc. You get the idea.
Now comes the problem. I have a Haynes manual.. and no where in that book does it tell me how to find Top Dead Center for cylinder one. Obviously, I know how to find this, BUT, there doesn't seem to be any info on what position the cam should be in when I am at TDC. Usually there is a blurb about lining up marks or something like that. Can anyone help? I kind of think that the valves for cyl one will be closed at TDC, which will help me in this task. I am just waiting for this info before I re-attach the head and associated parts. Thanks very much. |
#2
|
|||
|
|||
There is a dot on the cam that lines up with a line casted into the front rocker box.
Brian
__________________
Mercedes Benz Master Tech ASE Master Technician Diagnostic Technician Owner of "Behind the Star Inc." Raleigh NC. www.behindthestar.com brian@behindthestar.com |
#3
|
|||
|
|||
On the 2.3 liter engine...if it doesnt have the line,you tine up the mark on the cam with the deck of the head.
Can't remember which without looking at it. Brian
__________________
Mercedes Benz Master Tech ASE Master Technician Diagnostic Technician Owner of "Behind the Star Inc." Raleigh NC. www.behindthestar.com brian@behindthestar.com |
Bookmarks |
|
|