|
|
|
|
|
#1
12-14-2015, 10:42 PM
|
|||
|
|||
|
Need instructions for w209 (CLK) footwell flap arm replace
I have a broken arm on the left footwell actuator. I can find instructions for w203 but not w209. Anyone aware of where I could find some?
__________________
2008 S550 2010 GLK350 1997 E420 (retired) 2005 CLK500 (retired) 
|
|
#2
12-16-2015, 11:20 PM
|
||||
|
||||
|
it is pretty much the same procedure, but its tough i have done it on a 203 before. You do not have to remove the dash or console to replace the plastic linkage. do the right side linkage as well, wont be long before it breaks. Remove the command and the panel under the steering wheel and that should be enough room to wedge a long t20 screw driver in there to get to the screws.
Dont forget to normalize all stepper motors after replacement of linkage.
__________________
1985 300TD Turbo Euro-wagon 1979 280CE 225,200 miles 1985 300D Turbo 264,000 miles 1976 240D 190,000 miles 1979 300TD 220,000 GONE but not forgotten 1976 300D 195,300 miles 1983 300D Turbo 175,000 miles http://i42.photobucket.com/albums/e3...e485-1-2-1.jpg
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
