Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 05-08-2002, 01:15 PM
fla auto shop
Posts: n/a
Question 73 280 4.5-help with injectors

Here is a update on my diagnosis-
Quick recap - will run with fuel metered thru throttle bore -32 psi fuel pressure.
I opened ECU and see no burns or loose solder. I checked with my fluke 88 meter at the ECU connector the 4 trigger point signals and they are good on and off signals. Cleaned trigger points anyway. I then checked the ohms from the ECU unplugged to Each injector, all ok- no shorts or open. Next I checked with the car running on the fuel in the throttle bore, the injector signals and have none on all 8cyls.
Key on or engine running , all the injector wires at the ECU read ground on both lines to each injector (or pair) no voltage showing on any line.If I unplug the ECU and check voltage right out of ECU for the injector signal wires I have battery voltage and the common ground is good. If I plug in the ECU and unplug all the injectors I have a 12 volt and ground on every injector plug.
Also if I now crank engine with all injectors unplugged I have no noid light on any plug either.
Is this a ECU problem?
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 07:24 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page