Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 05-14-2002, 07:38 PM
Registered User
Join Date: Jul 2001
Posts: 14
Question Remote start tach signal...

I am currently installing a remote start unit to my MB 230CE w124 1988, and need a "traditional" tach signal.

The tachometer signal in my car delivers +12V decreasing as RPM increases. The remote start unit needs a voltage increasing by increasing RPM (like when you have a triggering signal for each revolution).

Is there any sensor on my car which I can hook up to to get such a signal? I have heard about a diagnostic output, but not sure if this is correct. If so, could someone tell me the pin-numer for the RPM output?

Thanks in advance!

Anders Eklo - Norway.
Reply With Quote
Old 05-14-2002, 08:28 PM
Registered User
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
On the front of the engine there is a signal. You will have to locate the sensor and follow the wire to the diagnostic connector.
Donnie Drummonds
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 05:43 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page