Quote:
Originally Posted by MAVA
Jim,
Check to see if your chrome ring(the coil) on the ignition is not pinched or open from the connector on the DAS box behind the cluster. You pinch, or cut that wire, and you are TOAST....
The signal is not picked-up
Martin
|
As noted in the OP, I checked the transponder ring by unplugging it at the DAS module, and verifying continuity via an ohm check. The transponder ring showed 0 ohms resistance. That suggests it's good, right?
Jim
__________________
14 E250 BlueTEC black. 45k miles
95 E320 Cabriolet Emerald green 66k miles
94 E320 Cabriolet Emerald green 152k miles
85 300TD 4 spd man, euro bumpers and lights, 15" Pentas dark blue 274k miles
|
09-03-2016, 08:29 PM
Threaded Mode
