Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Closed Thread
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-12-1999, 06:10 PM
pbnyc
Guest
 
Posts: n/a

I've recently purchased a 1970 250C. There are many many jobs that I'm, one by one, getting to. Any help with these two odd questions would be appreciated.

The seats have all been reupholstered and the padding, springs, and coverings are nearly faultless. But the main frame of the drivers' seat is pretty tired--this car's gone over 200k miles. The lower metal stop against which the seat back tab rests has broken off on the door side so the seat back sits slightly lopsided. I could either epoxy or solder in some new metal, I guess. Or might I be able to find a better frame and swap springs, padding and covering? Also, the vacuum locks don't work on either seat.

The P.O. fitted inertia reel harnesses to the front seats, but left the original (I guess) Kangol lap belts in the rear, aging under the seat. I expect to haul rear seat passengers very rarely, so I just want to make sure there are good lap belts back there. I don't think I need to retrofit a full 3-point harness. I kind of like the look of the Kangol hardware. Is there any company that will renew the webbing using the original hardware?

Thanks in advance,

Paul Berk
  #2  
Old 04-12-1999, 09:14 PM
M.B.DOC
Guest
 
Posts: n/a
Believe it or not but your seat is a safety item! Find a good used seat at a used parts yard. I have owned several coupes like yours & had to repair the seat in one of them. There are several good places that sell used M.B. parts.
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
190E manual seat base swapping haasman Tech Help 8 05-16-2005 11:19 PM
560 SL rear seat belts Roncallo SL Forum 2 11-23-2004 11:16 AM
How to fit seat belts for 3rd seat in W124 adbjw Tech Help 1 08-16-2004 04:43 PM
560SL seat rebuild (a bit long) cbdo SL Forum 0 02-08-2003 09:57 AM
350 SL (R107) rear seat belts PanzerWagen SL Forum 7 05-23-2002 05:09 AM



All times are GMT -4. The time now is 12:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page