|
|
|
#1
|
|||
|
|||
The engine was overhauled, but the engine fails to start, there seems to be a problem on the ignition timing, or the fuel injection system.
The car was taken to a mercedes benz dealer to look for the problem, but with no success. (They never really look at the car, just gave it a wash, and braking off the overflow pipe on the radiator) We managed to get the car started, but the person was alone, and was not able to kept the car running long enough to adjust the timing. He kept the engine running for about an half hour when the fan came loose and hit the radiator - mercedes didn't tighten the fan bolt- from that moment on the motors fails to start. When we put some fuel into the injection system, the engine starts momentarely, and dies (possibly fuel starvation), the fuel pump is in working order. We also noticed that the timing chain tensioner jammend, and kept the timing chain at full tension. But is it possible for the engine not to start due to the tensioner? Can the CIS cold start valve also be a factor? I also need technical data for the ignition system, distrubutor, ect. (disasembly & assembly) Also on the fuel injection system, anything that can help It is a 110 engine, straight 6, DOHC 123 series '79 model Thank You Stephan |
#2
|
|||
|
|||
If the engine starts after you put fuel in the intake it is gettin no fuel. Just because the pumps are running doesn't mean its getting to the injectors.
------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN LEAD TECHNICIAN FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
#3
|
|||
|
|||
Is there a way to test the fuel injection system for fuel delivery to the injectors?
Thanks |
#4
|
|||
|
|||
Yes, I have taken and injector out of the cyl before and bridged the fuel pump wires to run it all the time. With the engine OFF you can deflect the air plate and the injector should spray a steady stream. If the injector does not spray you have found the problem!
------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN LEAD TECHNICIAN FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem: The oil pressure light stays on | toka | Tech Help | 4 | 11-22-2008 04:44 PM |
Puzzling 240D starting problem | arkie | Diesel Discussion | 8 | 12-16-2003 09:23 AM |
240D intermittant starting problem | pj67coll | Diesel Discussion | 12 | 12-13-2003 07:16 AM |
intermittent starting problem | bcjm | Tech Help | 2 | 08-29-2002 10:40 AM |
Hard Starting 380 SL warm engine | lgriffi | Tech Help | 1 | 08-11-2001 09:50 PM |