|
|
|
|
|
#1
01-15-2019, 05:55 PM
|
|||
|
|||
|
Clutch Disc Search
The application:
1989 (and probably other years) 300E, manual transmission. Dimensions: 240mm OD 1 1/8"-26 spline (this spline is usually associated with GM, but seems to be what MB used) I would like to know the part#s for OEM, and aftermarket suppliers. 
|
|
#2
01-15-2019, 07:50 PM
|
||||
|
||||
|
Just went through this myself. Verify that you need the kit for single mass flywheel. The transition was 89-90. EPC shows models up to 9/89.
Aftermarket part nos: SACHS 3000 113 002 LuK 11-025 I couldn't find either available in the US. Took a month to get the SACHS kit delivered from Germany, but it finally got here. 
|
|
#3
01-15-2019, 08:07 PM
|
||||
|
||||
|
Aftermarket part nos above are for clutch kits. Here are numbers for disc by itself. I was able to find the clutch kit for only slightly more than the disc. About the same including the cost of getting the press plate resurfaced.
LuK: 324 0047 21 SACHS: 20 1862 116 031, 86 1862 116 003, 86 1862 116 031 VALEO: 803011
|
|
#4
01-15-2019, 08:07 PM
|
|||
|
|||
|
party:
Much thanks. You used the term "kit" in referring to your purchase; did you purchase a pressure plate & disc set (kit), or just a disc? Are the Sachs and LuK numbers for just the disc, or for a set?
|
|
#6
01-15-2019, 08:19 PM
|
|||
|
|||
|
For my recent E320 stick conversion using a 1988 300E 5 spd. trans (single mass flywheel) it was easy. Rock Auto provided the LUK kit you referenced below. Parts in the LUK box were Sachs products. It was about $255 in late 2016. It's currently out of stock. They list a Sacks kit, also out of stock.
__________________
Hanno '79 6.9 Sold (after 27 years) '83 280SL, 5 spd. '94 E320 Sdn. 5 spd conversion '02 E320 Sdn.(on loan to mom!) '87 300E (5 spd. conversion) Sold '05 E500 Wagon
|
 |
| Bookmarks |
|
|
Linear Mode
