Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-02-2019, 07:24 AM
engatwork's Avatar
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 12,244
2018 C63 AMG coming into shop, need information

If anyone out there has the WIS for an oil change on a new C63 I'd be interested in trying to get a copy. Looking for torque specs. tia
__________________
Jim
Reply With Quote
  #2  
Old 03-03-2019, 04:11 PM
Registered User
 
Join Date: Dec 2003
Location: Rogersville, Missouri
Posts: 172
drain plug one time only, plastic 4 nm
oil filter cover to oil pan 25 nm
capacity 9 ltrs
__________________
Paulwho
1987 190E-16v,
Reply With Quote
  #3  
Old 03-03-2019, 05:17 PM
engatwork's Avatar
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 12,244
Thanks for the info. I understand that there is another, smaller drain plug near the front of the pan that supposedly you get another quart out of when drained. I should be able to figure it out.
__________________
Jim
Reply With Quote
  #4  
Old 03-03-2019, 05:19 PM
tyl604's Avatar
Registered User
 
Join Date: Feb 2008
Location: Atlanta, GA
Posts: 3,211
So Mercedes is using throw away drain plugs now?
Reply With Quote
  #5  
Old 03-03-2019, 05:30 PM
engatwork's Avatar
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 12,244
Yep, plastic plug with rubber oring near filter cap - p/n is 002-990-20-17. Then you have another drain plug near the front of the engine oil pan.
__________________
Jim

Last edited by engatwork; 03-04-2019 at 06:07 AM.
Reply With Quote
  #6  
Old 03-03-2019, 05:47 PM
tyl604's Avatar
Registered User
 
Join Date: Feb 2008
Location: Atlanta, GA
Posts: 3,211
Except for the fact that it is alive and well, my '81 300SD would turn over in its grave.
Reply With Quote
  #7  
Old 03-06-2019, 08:08 PM
Registered User
 
Join Date: Aug 2017
Location: South NJ
Posts: 81
Its probably irrelevant now, but here you go.
Attached Files
File Type: pdf w205c63.pdf (110.4 KB, 29 views)
Reply With Quote
  #8  
Old 03-06-2019, 08:14 PM
engatwork's Avatar
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 12,244
Thanks, that is what I needed. I'll be doing it Sat morning.
__________________
Jim
Reply With Quote
  #9  
Old 03-07-2019, 12:59 PM
Registered User
 
Join Date: Nov 2010
Location: TX
Posts: 3,606
Quote:
Originally Posted by tyl604 View Post
So Mercedes is using throw away drain plugs now?
You wont want to look under a Ford truck then, the whole oil pan is made of plastic.
__________________
2012 BMW X5 (Beef + Granite suspension model)

1995 E300D - The original humming machine (consumed by Flood 2017)
2000 E320 - The evolution (consumed by flood 2017)
Reply With Quote
  #10  
Old 03-07-2019, 02:02 PM
Registered User
 
Join Date: Aug 2017
Location: South NJ
Posts: 81
Look at the 725.0 trans pan and you’ll understand why waste is.
Reply With Quote
  #11  
Old 03-07-2019, 02:45 PM
Registered User
 
Join Date: Nov 2010
Location: TX
Posts: 3,606
Quote:
Originally Posted by ytech15 View Post
Look at the 725.0 trans pan and you’ll understand why waste is.
Exactly same as the ZF 8 spd boxes, good that aftermarket is now making those pans with removeable filters, dont know about the 9G tronic though.
__________________
2012 BMW X5 (Beef + Granite suspension model)

1995 E300D - The original humming machine (consumed by Flood 2017)
2000 E320 - The evolution (consumed by flood 2017)
Reply With Quote
  #12  
Old 03-07-2019, 07:15 PM
Registered User
 
Join Date: Aug 2017
Location: South NJ
Posts: 81
And it does not end there, I am not brave enough to rebuild these units without replacing most or all of the aluminum bolts that go into magnesium/aluminum (housing) which are literally all the fasteners besides the valve body. I have seen people not replacing them, not using thread sealant and/or butchering them with impacts (which is much worse).
Reply With Quote
  #13  
Old 03-07-2019, 07:44 PM
engatwork's Avatar
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 12,244
Quote:
Look at the 725.0 trans pan and you’ll understand why waste is.
What do you mean by this?
__________________
Jim
Reply With Quote
  #14  
Old 03-07-2019, 09:57 PM
Registered User
 
Join Date: Aug 2017
Location: South NJ
Posts: 81
The filter elements and magnets are integrated to the plastic pan. (not sold separably by MB)
Attached Thumbnails
2018 C63 AMG coming into shop, need information-725.jpg  
Reply With Quote
  #15  
Old 03-08-2019, 06:23 AM
engatwork's Avatar
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 12,244
That is how ZF does it for the BMW transmissions.
__________________
Jim
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:48 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page