Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-20-2002, 04:17 AM
Registered User
 
Join Date: Jun 2002
Location: Monrovia, CA
Posts: 490
H/L Wiper Blade Replacement

I've been going over my new (to me) '86 300E fixing several little things. One of them is replacing the headlight wiper blades and re-aligning the wiper arm.

Can't figure out for the life of me how to get the old blades out without the risk of breaking something. Can anyone shed some light on this procedure for me? Also, how can I remove the wiper
blade arm to re-align the arm properly.

Thanks,

Gary
Reply With Quote
  #2  
Old 06-20-2002, 08:52 AM
LarryBible
Guest
 
Posts: n/a
It is a very difficult task. You grab the blade and pull straight away from the arm. It pops right out.

To align the blade, I suggest running them a few times to ensure that they are finding their home position. If they are indeed still not aligned, fold the arm out, and you will see a nut, I think 8MM. take off the nut, pull the arm, turn it where you want it and push it back over the splines. then replace the nut and fold the arm back in place.

Good luck,
Reply With Quote
  #3  
Old 06-20-2002, 12:46 PM
Registered User
 
Join Date: Jun 2002
Location: Monrovia, CA
Posts: 490
H/L Wiper Blade Replacement

Thanks.

I tried that at first, but I was pulling hard enough that I thought I might break the plastic insert that they're attached to. I was thinking there might be some mechanical release I needed to actuate. I'll try again, carefully.

Gary
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:28 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page