![]() |
|
|
|
#1
|
|||
|
|||
lost all gears 2001 W210 E280-4matic
Last week I lost all gears.
The car drove well all day, but when I tried to pull away at a traffic light it shook and accelerated badly. After the second traffic light, all managed to drive away by switching off the engine and starting it again, after that all gears were gone. Now it stuck in Neutral The errors were: 1- P2502 The gear in implausible or the transmission is slipping 2- P220A The speed comparison of Y3/6n2 to Y2/5y3 is implausible Later I checked with DAS with the following results. ![]() ![]() Sometimes the N3 value changes (Lower or 0). The voltage (pin 38 on control module) to the valves is 3 Volt. Rob |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|