|
|
|
|
|
#1
06-04-1999, 06:13 PM
|
|||
|
|||
|
The dash light(s) on the left side of the dash on my 1989 190E 2.6 is inoperative. This light illuminates the oil pressure, fuel, water temp. All other lights are working just fine. How do I get into the dash to replace the bulb, if indeed that is what needs replacing?
|
|
#2
06-04-1999, 06:43 PM
|
|||
|
|||
|
First you have to disconnect your speedo head cable locate at driver side of rear trans 10mm bolt remove and pull the cable loose,then use a hook(140-589-02-33-00)MB special tool to pull out insturment cluster
to replace blubs. have fun! ------------------ MB STARS Master Guild Technician,12 years MB tech 5 years independent shop owner |
|
#3
06-05-1999, 09:02 AM
|
|||
|
|||
|
I would push the cluster from the back side instead of using the tool. I've had way too many clusters crack on me and it's not pressed in that tight.
------------------ 83 TDT 110K |
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Flywheels... 300E-24 Vs 190E 2.6 sportline... | Bigg_P | Mercedes-Benz Performance Paddock | 1 | 01-28-2003 09:21 PM |
| 3.0 into 190E 2.6 | neileg | Mercedes-Benz Performance Paddock | 10 | 11-22-2002 05:54 AM |
| 3.0 into 190E 2.6 | neileg | Tech Help | 2 | 11-01-2002 11:30 AM |
| Wanted: MB Rims, 190E suspension parts, euro lights, etc. | Chiragp | Mercedes-Benz Used Parts For Sale & Wanted | 6 | 06-16-2000 11:15 AM |
| Reasonable Price for a 93 190E 2.6 w/ 90K miles | Chiragp | Mercedes-Benz Performance Paddock | 3 | 04-22-2000 11:11 PM |
Linear Mode
