Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 07-30-2002, 02:12 PM
Posts: n/a
Unhappy Clutch problem ....

Hi !

Need advice and help about the master & slave cylinders of the clutch on a 97 W2O2, C250 TD.

Sometimes, when I keep the clutch pedal down, waiting at a light, and the gear on, the pedal doesn't raise up, and I can't release the shift knob.
To release it, I must switch off the engine, and pull the pedal with my foot.
But I don't observe that everyday.
I've checked the brake fluid bottle, but the level doesn't change.
After that, I've checked the master cylinder, but can' see any leakage, same for the slave cylinder close to the gear box.

I've been told it might be Air in the system, due to internal defect in the cylinders ( slave or master).

Any help or advice would be appreciate, Thanks in advance !


NB: Please, don't make fun of my english...
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 10:00 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page