Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Closed Thread
LinkBack Thread Tools Display Modes
Old 06-16-1999, 01:02 PM
Posts: n/a

I have an 83 300SD that had a problem with a fluctating temperature gauge for many years, that seemed to emulate a loose ground. It appears replacing the temp sender with a dealer part finally solved the problem, even though I had replaced it 3 yrs ago with a beck-arnley aftermarket replacement.

Nothing seems to work like genuine parts...
Closed Thread


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bizzarro OVP problem solved! classic69 Tech Help 51 12-05-2003 10:05 PM
fuel gage and temperature gages stopped working on 92 190E vterry Tech Help 3 07-28-2003 02:15 PM
400E rough idle problem finally solved carman850 Tech Help 1 04-19-2002 07:38 PM
S500 long cranking time problem FINALLLLLLY Solved!!! fenix Tech Help 2 09-29-2001 01:33 PM
Temperature gage problem mbz owner Tech Help 0 06-14-1999 02:27 AM

All times are GMT -4. The time now is 08:51 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page