Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-24-2002, 07:55 PM
Registered User
 
Join Date: May 2000
Posts: 376
M.B. Doc and other 16V owners, cheap lower chamber testing adapter.

I found a cheap line to adapt to the lower chamber fitting on my 16V. Space is EXTREMELY limited.

M.B. Doc stated that he has been using a custom 90 degree fitting on the end of the factory adapter after loosening the fuel distributor to get it on. Sounded like too much work so I stopped by Pick a Part this am to find/modify something to work.

Turns out that the braided injector lines off of an Audi or watercooled VW were just the ticket. Make sure you get the banjo bolt and washers that screw into the fuel distributor. They will thread right into the lower chamber test port. You will need an adapter to mate the injector end to your CIS tester, but mine came with one that worked. Cost me $2.99 plus tax. Got to love the OCCASIONAL cheap fix.

Tinker
Attached Thumbnails
M.B. Doc and other 16V owners, cheap lower chamber testing adapter.-p1012148.jpg  
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page