|
|
|
#1
|
|||
|
|||
Need Your Assistance Please
the cloth braded rubber hose that goes from the master cylinder reservoir to the clutch petal was leaking, and while i was messing with it, it pulled away from the clutch petal.
1. can I replace with a rubber fuel hose? 2. what is the best way to put the hose on? thank you very much Jeff 1987 190E 2.3 16V 5 speed |
#2
|
|||
|
|||
You should get the blue silicon hose that is designed for brake fluid.
The hose attaches to a plastic fitting at the clutch master cyl. The fitting goes into a rubber seal. All can be purchased separately
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician |
#3
|
|||
|
|||
thank you.
It looks like I feed the hose through the hole under the dash. and then try to connect it to the clutch petal. Not much room under there! jeff |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|