Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-13-2002, 10:05 PM
firstdiesel's Avatar
Registered User
 
Join Date: Sep 2002
Location: South Florida
Posts: 237
First post old question

I have a 1980 300TD non turbo. I have browsed the search section, to no avail. Same question with a slightly different car:

Heat all the time, blower does not come on when selecting a/c high or low, unless selecting bilevel first.

Vaccume seemed to test fine with the pushbuttons removed and plug sealed, but it leaks with the pushbutton installed. Temp sensor appears to be new and tubing is brand new (even says Goodyear on the new rubber tube.)

Temp runs cool with the climate control amp unplugged and hot with it plugged in.

A/C servo under the hood is new!!$$ I can't get the compressor to turn on but I think that is a question for another day!

I appologize for the length but I have run out of lower cost items. Is there a way to test the Climate control amp? The 12 pin can be tested on an '82, but can the 8 pin be tested with an ohm meter?

Anything would be a big help at this point. Thank you for your help in advance.

Todd
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page