I am in the process of putting a 300te engine into a 190e 8v. It is to be turbo charged running an aftermarket ecu(distibutorless). I am starting to set up the ECU and i need to know the correct firing order and base timing for the m103.983 engine. I would like to know the ignition timing at idle with vacuum hose disconnected, the ignition timing with only centrifugal advance(and the rpm which it occurs), and the ignition timing with full vacuum advance(and the rpm which it occurs). Any help would be greatly appreciated. I need the advance to set a base point for my distributorless ignition. Thanks