well i'm down to the switches in the console piece around the shifter. once i got the right things apart the console shifter plate just lifts out.

but now i can only lift the plate very little due to the wiring harness for the switches. so how do the switches unhook from the shifter plate. i'm leary about trying to unhook the wiring cause it is 14 years old and they look a bit brittle.

also what is that aluminum looking housing i see under the front part of the consol.

thanks for your help

__________________
Thanks Much!
Craig

1972 350sl Red/Blk 117k
1988 420sel charcoal/Blk 140k
1987 420sel gold/tan 128k
See My Cars at:http://mysite.verizon.net/res0aytj/index.html

Pound it to fit then Paint it to match!

There is only First Place and Varying degrees of last!

Old age and deceit will overcome Youth and Enthusiasm every time!

Putting the square peg in the round hole is not hard... IF you do it fast enough!

Old enough to know better but stupid enough to do it anyway!