Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-17-2003, 05:48 PM
drbrandini's Avatar
GO DUKE!
 
Join Date: Sep 2001
Location: Wrightsville Beach NC
Posts: 1,512
300E water pump replacement using snap on tool ?

Ok...Let me make sure I got this correct. I have just ordered the snap on tool part # FLXM13 for replacing the water pump the easiest way.

I start by removing the pulley then the serp. belt. Then use my new tool for getting the 3 bolts off and then remove the tensioner shock so that the 6mm allen bolt on the bottom is accesable. Then remove and roll out the water pump. Do I have this correct. Thanks.
__________________
Brandon



2008 S550
1957 Dodge D100
1967 VW Microbus 21 Window
2001 Suburban
2004 Beach cruiser bicycle
-----------------GO DUKE!-----------------

"It cannot be emphasized too strongly or too often that this great nation was founded not by religionists, but by Christians; not on religion, but on the Gospel of Jesus Christ. For that reason alone, people of other faiths have been afforded freedom of worship here." Patrick Henry 1776
Reply With Quote
  #2  
Old 01-17-2003, 05:57 PM
Senior Member
 
Join Date: Apr 1999
Location: Walnut,CA,USA
Posts: 554
Also remove number 1 bolt for intake at front of engine for pump to easy roll out. holp this help
__________________
MB STARS Master Guild Technician,17 years MB tech
14 years independent shop owner
Reply With Quote
  #3  
Old 01-18-2003, 01:12 AM
drbrandini's Avatar
GO DUKE!
 
Join Date: Sep 2001
Location: Wrightsville Beach NC
Posts: 1,512
MB,

Thanks I almost forgot !!
__________________
Brandon



2008 S550
1957 Dodge D100
1967 VW Microbus 21 Window
2001 Suburban
2004 Beach cruiser bicycle
-----------------GO DUKE!-----------------

"It cannot be emphasized too strongly or too often that this great nation was founded not by religionists, but by Christians; not on religion, but on the Gospel of Jesus Christ. For that reason alone, people of other faiths have been afforded freedom of worship here." Patrick Henry 1776
Reply With Quote
  #4  
Old 01-19-2003, 10:48 AM
drbrandini's Avatar
GO DUKE!
 
Join Date: Sep 2001
Location: Wrightsville Beach NC
Posts: 1,512
MB,

It has been noted not to add sealant of any kind to the O-ring but to apply a little grease to hold it in place while you install it. What kind of grease do I use? and should I place it around the entire seal or just in a few spots to hold it ? Thanks again, the reason I ask is my WP came with instructions (go figure) and they say to add sealant. While I honor the instruction of the posters here more than I do the manufacturers instructions I just want to make sure this thing doesn't leak after all that work.
__________________
Brandon



2008 S550
1957 Dodge D100
1967 VW Microbus 21 Window
2001 Suburban
2004 Beach cruiser bicycle
-----------------GO DUKE!-----------------

"It cannot be emphasized too strongly or too often that this great nation was founded not by religionists, but by Christians; not on religion, but on the Gospel of Jesus Christ. For that reason alone, people of other faiths have been afforded freedom of worship here." Patrick Henry 1776
Reply With Quote
  #5  
Old 01-19-2003, 11:48 AM
Senior Member
 
Join Date: Apr 1999
Location: Walnut,CA,USA
Posts: 554
Just like you says put few spots of grease to hold the O ring in place will do it. any lube grease
__________________
MB STARS Master Guild Technician,17 years MB tech
14 years independent shop owner
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:40 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page