I'm having trouble getting into a couple of pdf files on my manual.It is a genuine MB disc so I'm assuming it was made this way but I was wondering if someone could check their CD and see if these files appear.The page in the manual will open but it's transparent usually (once it was white but blank),the bar at the bottom of the page says that it's finished loading but there's nothing there.Here are the two files I'm having trouble with-

• Disc 1
• Engine Manual
• Combustion manual
• 07.3 Mechanical/electronic gasoline injection system (KE injection)
• 0121 Testing electrical components of KE injection system
• D:\Program\Engine\103\07.3-0121.pdf

The other one is the wiring diagram in the electrical manual, also on disc 1.This is for our 88 300 CE, thanks in advance.

__________________
Democracy dies in darkness, you have to kick at the darkness till it bleeds daylight

Anyone?

__________________
Democracy dies in darkness, you have to kick at the darkness till it bleeds daylight

Wish I had it Kyle so I could help....
Sorry.

__________________
'99 S420 - Mommies
'72 280SE 4.5 - looking to breathe life into it
'84 300SD Grey - Sold
'85 300SD Silver - Sold
'78 Ski Nautique

I was able to open the first file that you had mentioned - 07.3-0121.pdf.

If you have the file name for the second one you are having problems with, I'll be able to check it out.

BTW, I am using Acrobat Reader 5.0.

Good luck.

Here it is

__________________
1999 Porsche 996 Carrera Convertible
1994 420E - SOLD
1986 300E - SOLD, what a car
609 Certified

Thanks guys for the response, You can e-mail me the file at liz.kyle@shaw.ca. We're on cable so if you zip it it should work fine.The other file I haven't been able to open is on disk 1 and it's in the Electrical troubleshooting manual,wiring diagrams.
D:\Program\ETM\ETMpdf
I'm not sure if this is the right address or not though because my computer freezes as soon as it opens the file

__________________
Democracy dies in darkness, you have to kick at the darkness till it bleeds daylight

Try opening Adobe Acrobat first, then open the ETM. Or open the ETM directly with Adobe.

__________________
Chuck Taylor
Falls Church VA
'66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe

I am e-mailing you the file right now.

__________________
1999 Porsche 996 Carrera Convertible
1994 420E - SOLD
1986 300E - SOLD, what a car
609 Certified

I am e-mailing you the file right now.

__________________
1999 Porsche 996 Carrera Convertible
1994 420E - SOLD
1986 300E - SOLD, what a car
609 Certified

Thanks Pedro ,I received it and opened it just fine,anybody with the electrical file?

__________________
Democracy dies in darkness, you have to kick at the darkness till it bleeds daylight

Adobe Acrobat 5.1 solved the problem with my manual. I'm not sure why MB would include a program (Abobe 3.0) that won't open the large files. Thanks for the help guys

__________________
Democracy dies in darkness, you have to kick at the darkness till it bleeds daylight

I too had problems opening the larger files directly from the CD... getting blank pages. But I got around it - - can't remember exactly how, but I think it was by using My Computer, locating the files, and double clicking on them.

__________________
95 E320 Cabriolet, 159K