Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 02-24-2003, 12:50 AM
Registered User
Join Date: Dec 2002
Location: Biloxi Ms.
Posts: 1
Code P0411 1995 c220

I have a 1995 c220 and I keep getting this code P0411. I would like some INFO on what to check. I have checked the Vacuum lines and the replaced the purge valve. I know it is in the emmissions but I am stumped as where to look next. What should I check Next ? Thanks in advance.
Reply With Quote
Old 02-24-2003, 08:17 AM
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
P0411 - secondary air injection flow too low.

This is an easy system to test with a proper scanner. In activations the air pump is turned on and the O2 sensor voltage must go below 40mv in a short time. The typical problems involve the vacuum control of the airpump check valve, the air pump itself, the circuit to the air pump and the O2 sensor itself. This is not usually a piping problem.

The things you can do are to watch for the air pump working on a cold start and verify that the vacuum is reaching the check valve at that point and proceed from there.
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote
Old 08-24-2003, 09:58 PM
1995whitec220's Avatar
Registered User
Join Date: Aug 2003
Location: Long Beach CA USA
Posts: 40

I had this code, I checked out the secondary air injection pump and it was functioning normally, pumps ran, vaccuum powered valve worked. This error is reported to ECU by #1 oxygen sensor which I replaced and the light never came back, car starts easier now when hot. $99.00 part at partsshop
1995 c220 (harness issues sold)
1999 clk 320 cabriolet
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 11:05 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page