|
|
|
|
|
#1
02-01-2000, 07:06 PM
|
|||
|
|||
|
i have a 1988 560SEL and i need access to the switches on the center consel, more specificly the fader switch. How do i get the wood face off without chiping anything, I've had the raido out all ready and my problem must be farther down the line. I also need to test out the switch for the passenger side window, it may be bad.
Thanks for your time. ------------------ 
|
|
#2
02-01-2000, 08:54 PM
|
|||
|
|||
|
Pull the ashtray out and the change pocket below it. Then the wood will slide forward and out. Good luck.
------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM
|
|
#3
02-02-2000, 07:10 AM
|
||||
|
||||
|
As to the window switches, you can probably plug the connector for one of the other windows into the switch in question. Mine were intermittent on the driver's side window in my 1977 300D, and I was able to remove the switch and disassemble it, clean its internal parts, and reassemble it. Just watch out that you don't lose any of the little springs and little parts.
------------------ Robert W. Roe 1984 300SD 167K mi
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| center vents not working on 560SL | lynns | Mercedes-Benz SL Discussion Forum | 50 | 07-31-2011 11:53 PM |
| MB Classic Center Set for Irvine California | MTI | Off-Topic Discussion | 2 | 12-18-2004 11:58 PM |
| R&R of center console trim tips for access to HVAC head and window switches | pookydink | Tech Help | 1 | 01-15-2003 07:49 AM |
| R&R of center console trim tips for access to HVAC head and window switches | pookydink | Tech Help | 0 | 01-14-2003 09:29 PM |
| Flex Discs | KylePavao | Diesel Discussion | 14 | 09-19-2002 07:14 AM |
Linear Mode
