Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 04-13-2003, 10:13 PM
bd37703's Avatar
Registered User
Join Date: Jul 2002
Location: Maplewood, NJ
Posts: 68
changing rear shocks on 300E - DIY (?)

Can somebody point me to a online step-by-step manual (DIY) on how to change REAR shocks on a 300E (1991 300E 3.0L)? (I bought Bilstein comforts on performance products for $61 each)

If you know of threads that have dealt with the step-by-step on this topic, please send me the thread info ..... I did do searches on this forum and I could not find an online manual or detailed information on how to replace the rear shocks.

Thanks very much!

p.s.: I have ordered the "Haynes Service & Repair Manual" and I don't have it yet ....

Reply With Quote
Old 04-14-2003, 06:33 AM
Posts: n/a
The Haynes manual should cover it, but you shouldn't need it. The tops of the shocks are accessed in the trunk and the bottoms are obvious. The only tip you need is to put the bottom in place and start the bolts, then cut the wire that keeps the shock compressed and guide into place as it extends.

This is a simple job.

Good luck,

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 10:23 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page