Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 04-21-2003, 08:15 PM
Registered User
Join Date: Nov 2002
Location: tampa fla
Posts: 8
passenger seat beeps and seat belt light on in dash

Hi folks.

I removed my sheep skin seat covers off my 1996 SL320 and now the passenger seat does not go back all the way and the seat beeps for about 30 seconds. I also have a seat belt light on the dash. Can you tell me how to get into (take apart ) the seat and see whats causing this problem. I am also looking for a service manual on CD if anybody has one to sell. Thanks in advance


Reply With Quote
Old 10-20-2003, 04:42 PM
Registered User
Join Date: Sep 2003
Location: Dallas, Tx
Posts: 701
Seats Beeping in SL320

I have noticed on my SL320 that when you operate the car and the seats are not in the proper position, it alarms you with a beep. I would start by moving the seat completely forward, and folding it up. Look for the switch notifying the system that the seat is in the down position. I think that when you removed the seat covers one of the elastic straps may have hit your switch and corrupted it. Good Luck.
Reply With Quote
Old 10-20-2003, 09:11 PM
Gilly's Avatar
Registered User
Join Date: Mar 2001
Location: Evansville WI
Posts: 9,616
I'd just make sure nothing is blocking the seat from going back, tilt it ahead and look between the upper and lower parts. maybe, if nothing is found, try pulling the chrome backrest release handle and then try putting the seat backrest into the normal position. The beeping is going to continue until the backrest is latched, this is normal. Never seen a backrest that refused to go back to the normal latched position. I agree it may be a good idea to move the seat forward as far as possible. There is a proximity sensor which prevents the seat backrest from contacting the rear areas of the car. If the backrest is reclined back, the seat bottom moves ahead, this is very cool to try out. OR if the backrest is reclined, then the seat is adjusted rearwars, the backrest will come to a more erect position. What probably happened is that the backrest was reclined, then you tilted the backrest forward to remove the sheepies, but then you also moved the seat backwards to help get access to remove the covers. Now it's hitting something in back, some trim or something, so just try moving the whole seat forward and then the backrest will latch.


Reply With Quote
Old 10-20-2003, 10:51 PM
Registered User
Join Date: Feb 2003
Location: Ontario, Canada
Posts: 3,160
Could be the rest of the sheep stuck in there, since you only removed the skin.

Sorry, couldn't help it.

2007 C 230 Sport.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 05:01 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page