|
|
|
#1
|
||||
|
||||
Source for parts number book needed
Does any one know where I can get an illustrated book which shows the parts and their related factory numbers? This would be for W107 and W126 chassis cars.
I tried the eBay vendor - no luck. Thanks. |
#2
|
|||
|
|||
I have never seen the dealer parts book for either of these on ebay or anywhere else. You might try www.tmcpubl.com, or send an email to cth@mbz.org.
__________________
Chuck Taylor Falls Church VA '66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe |
#3
|
||||
|
||||
Someone in the parts forum is offering a set of EPC CDs for less than $15.
Sixto 91 300SE 87 300SDL 83 300SD |
#4
|
||||
|
||||
Thomas
If you find a source. Let me know. I wouldl like one for the 107 and 123. Dave
__________________
1970 220D, owned 1980-1990 1980 240D, owned 1990-1992 1982 300TD, owned 1992-1993 1986 300SDL, owned 1993-2004 1999 E300, owned 1999-2003 1982 300TD, 213,880mi, owned since Nov 18, 1991- Aug 4, 2010 SOLD 1988 560SL, 100,000mi, owned since 1995 1965 Mustang Fastback Mileage Unknown(My sons) 1983 240D, 176,000mi (My daughers) owned since 2004 2007 Honda Accord EX-L I4 auto, the new daily driver 1985 300D 264,000mi Son's new daily driver.(sold) 2008 Hyundai Tiberon. Daughters new car |
#5
|
||||
|
||||
Part Numbers
hi guys
as luck would have it i just purchased that exact mb book with all replacement part numbers up thru 1991. it should be here in a week. tks much craig
__________________
Thanks Much! Craig 1972 350sl Red/Blk 117k 1988 420sel charcoal/Blk 140k 1987 420sel gold/tan 128k See My Cars at:http://mysite.verizon.net/res0aytj/index.html Pound it to fit then Paint it to match! There is only First Place and Varying degrees of last! Old age and deceit will overcome Youth and Enthusiasm every time! Putting the square peg in the round hole is not hard... IF you do it fast enough! Old enough to know better but stupid enough to do it anyway! |
#6
|
|||
|
|||
The EPC covers all models up to the version date. It starts in the early sixties with 111,112, 110 chassis.
They are all boot-leg but are often available on ebay. One will need two CD drives or a "virtual CD" arrangemnent as both discs have to be available,
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician |
#7
|
||||
|
||||
EPC
hi
i have that epc from ebay and i've yet to get it to fully work no matter what i do to the installation. i'm sure it's something that i'm doing. the only thing it does is go to the page that asks for the series # but i just can't get it to recognize 126 or w126 tks craig
__________________
Thanks Much! Craig 1972 350sl Red/Blk 117k 1988 420sel charcoal/Blk 140k 1987 420sel gold/tan 128k See My Cars at:http://mysite.verizon.net/res0aytj/index.html Pound it to fit then Paint it to match! There is only First Place and Varying degrees of last! Old age and deceit will overcome Youth and Enthusiasm every time! Putting the square peg in the round hole is not hard... IF you do it fast enough! Old enough to know better but stupid enough to do it anyway! |
#8
|
||||
|
||||
l bought the same crap on ebay....does'nt work either and l am sure its not something l am doing.
__________________
1993 500SEL |
#9
|
||||
|
||||
Re: EPC
Quote:
Sixto 91 300SE 87 300SDL 83 300SD |
#10
|
|||
|
|||
The EPC is designed to run on a proprietary Bell and Howell PC with both discs running. Getting it set up is a big problem.
The first screen up should be a picture of an SLK. In that screen the chassis number can be inserted or if you hit enter and chose "car" it will bring up a list of models which can be scrolled and clicked to enter. Very straight forward and both the sales designation (560SEL) and the identifying chassis number componenet (126.039) are listed.
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician |
#11
|
||||
|
||||
bell and howell
hi steve
was there anything special about the b&h computer. or was it just the 2 cdrom setup. did it require anything in the bios/cmos to work? thanks for the info i'll try it again. craig
__________________
Thanks Much! Craig 1972 350sl Red/Blk 117k 1988 420sel charcoal/Blk 140k 1987 420sel gold/tan 128k See My Cars at:http://mysite.verizon.net/res0aytj/index.html Pound it to fit then Paint it to match! There is only First Place and Varying degrees of last! Old age and deceit will overcome Youth and Enthusiasm every time! Putting the square peg in the round hole is not hard... IF you do it fast enough! Old enough to know better but stupid enough to do it anyway! |
#12
|
|||
|
|||
Just the two cd thing, I think. In installs that I have seen the thing was loaded as an update. I have heard that it often takes a number of attempts.
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician |
#13
|
||||
|
||||
part numbers
hi all
i got the book in today. covers everything. even gives prt nos on audio speakers, paint you name it. don't have time rite now but i'll be back later today. craig
__________________
Thanks Much! Craig 1972 350sl Red/Blk 117k 1988 420sel charcoal/Blk 140k 1987 420sel gold/tan 128k See My Cars at:http://mysite.verizon.net/res0aytj/index.html Pound it to fit then Paint it to match! There is only First Place and Varying degrees of last! Old age and deceit will overcome Youth and Enthusiasm every time! Putting the square peg in the round hole is not hard... IF you do it fast enough! Old enough to know better but stupid enough to do it anyway! |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|