Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 05-02-2003, 10:49 PM
Registered User
Join Date: May 2000
Location: Quebec City
Posts: 83
Unhappy Tab bushing position

Got my front tabs back from the dealer today where they pushed in new ball joints and new bushings. I've taken photos before the job and found that they have incorrectly installed the new bushings.

Job 33-0525 'Replacing control arm mounting' on the shop CD specifies that on model 124, the rear mounting should be installed with the flat section of the bushing facing up and the front with the the flat facing sideway. Both were installed facing sideway !

The bushings come in pair each with different rubber hardness : the harder one (3 lugs) was previously on the rear mounting and is now on the front mounting !

The job call for a special tool to flare the clamping sleeve holding the 2 parts of the bushing. No flaring was done by the dealer !

So, not a great job : that I could have done myself at a far cheaper price !

Would I go to a disaster by putting back those tabs as returned by the dealer or is it better to wait next monday to have the job redoned ? Actually, I'm more with the second option.
1992 300D 2.5T 351 000 km
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 07:01 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page