Steve,

congratulation and thank you for the write up.

When we replaced the pots (I organized a group buy for 22 potentiometers ) we adjusted the new ones to 0.7V between pin 1 and 2 with the engine idleing. That 0.7V is the test value from the workshop manual/CD.

Can you check the voltage?

Problem with Ohms is that you can't get a correct value from an old and used potentiometer...

Tinker,

the potentiometer for the 2.5-16 is the same as "allways"...
Replacing that is not much more work than on a 300E I think.

bis denn,
Christian

1989 300TE

__________________
improve your German - please visit my homepage :-)
Das W124-Archiv