Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 06-11-2003, 01:24 PM
captaincrunch's Avatar
Registered User
Join Date: Apr 2002
Location: Jonesboro, GA
Posts: 52
W210 combination switch broke!

I broke it! pulled to flash headlights while turn signal was on while turning while trying to avoid a crash while wife was screaming while radio was on while closing my eyes . . . . anyway, it's broke.

Turn signals work fine, wiper too. But the spring for the headlights seems broke. The lever is loose and flops forward and backward easily. This causes the high beams to come on and off a lot.

Took of the little black cover and it looks like there's a pin that runs through the lever and into a box type fitting that holds the lever in an allows it to pivot forward and backward. This pin is pulled out of the hole in the box, not the lever.

Question: How difficult is it to change this switch? Can I replace this box or does it come a one complete unit?

With my luck I figure taking the whole steering column apart taking the tires of and removing the engine!:p
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 03:41 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page