Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 06-13-2003, 05:40 AM
MRPerformance's Avatar
Registered User
Join Date: May 2003
Posts: 24
Question 104 engine injector seal question

I've removed the fuel rail and injectors from a '93 300E 3.2 (104.992 engine). I pulled the injectors out of the fuel rail to have them cleaned and hoped to replace the upper (fuel rail) and lower (intake manifold) seals. The lower seals are on order but MB says the upper seals are not available separately so they're not even shown in the parts diagrams.

The old seals are in fine shape so I'd reuse them if I had to but I've got 8 "O" rings for a 6 cylinder car.

Are there really supposed to be two upper injector seals and if so, where do they go? One on the injector itself and one between the injector and the rail? Both on the injector?

I may well have misplaced the other 4 seals but I need to know where they go if I find them. I can't even find the intake manifold and injectors in the factory service CD.

And while I'm asking, anybody know of a ready source for replacement seals?


'93 190E 2.6 Sportline
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 10:59 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page