Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-20-2000, 10:11 AM
juan
Guest
 
Posts: n/a


Drove my 300 Sd 300 miles yesterday no problems....

I tried to start it this morning would not turn over..
I tried to jump start it... nothing..

The lights work and the gages move and the glow plug light comes on ..,, but it wont turn over


Thanks Guys..

Sorry I didn't describe my problem clearer,, But I am late for work.. Spent the AM fiddling with the SD...

Juan....

Reply With Quote
  #2  
Old 03-20-2000, 12:31 PM
LarryBible
Guest
 
Posts: n/a
Juan,

Use a voltmeter to test for voltage at the starter solenoid and main starter connection. If there is voltage at the solenoid when turning the key to start, and the headlights and other high current draw items work normally, most likely it's starter time.

Good Luck,

------------------
Larry Bible
'84 Euro 240D, 516K miles
'88 300E 5 Speed
Over 800,000 miles in
Mercedes automobiles
Reply With Quote
  #3  
Old 03-20-2000, 11:28 PM
juan
Guest
 
Posts: n/a
quote:
Originally posted by TXBill:
I only say this because it has happened on two different SD's is make sure you have it all the way in park. Did you try to start it in neutral? Shifter bushings are common replacement items on these cars. If your car starts in neutral you can further confirm this by turning it back off and putting it right back in park. If it starts it's in park, if it does not start get out and try to push the car and see how far it rolls. Be careful. And good luck!



Spoke to the guy who sold me the car, Turns out there is a Kill switch under the drivers side dash.. There is a toggle switch and a switch to depress.. It seems the only way to start the car is by depressing the switch and turning the key at the same time ..I don't understand why this problem is just now occuring... I must have disconnected some wire by mistake. I dread having to go through this routine every time I start the car...I have another question, I had a key made for my 300 SD at a flea market.. I half expected the key not to work.. It was real cheap metal and for only $3.00, no way. When I left the Flea market I tried the key and it worked.. But it did not turn smoothly.. I wonder if this trigged the problem.... Thank you Juan....


[This message has been edited by juan (edited 03-20-2000).]

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Drove first 500SL today pentoman Mercedes-Benz SL Discussion Forum 11 01-13-2005 05:26 AM
this OLD man did 30 miles in 2 hrs today ThrillBilly Off-Topic Discussion 7 05-21-2004 11:00 AM
I drove a beautiful '87 300 SDL today and... oilslick Diesel Discussion 30 02-18-2004 06:59 PM
300 D-T Engine Misses During Cold Start Skip Diesel Discussion 48 05-06-2003 11:44 AM
300 TE Won't start. Fuel system expert, please! Ron Johnstone Tech Help 3 05-13-2002 09:24 AM



All times are GMT -4. The time now is 05:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page