Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 06-22-2003, 09:52 AM
Registered User
Join Date: Jul 2002
Location: Dallas
Posts: 330
Replacing my AT Protection Switch

I've been watching this bugger for a year. Have had a slow drip of tranny fluid. Recently it's gotten a little worse so I went ahead and ordered the part. Due in Monday via UPS.

Has anyone ever replaced this part before? Wondering if I will loose the fluid when I pull the old plug out. Can I minimize the loss of fluid when I change the part out by Jacking up the car from the left (driver's) side and changing it out while the car is unlevel? Of course, this will be done with jack stands under both the front and rear.

Thanks a bunch everybody.
Reply With Quote
Old 06-22-2003, 11:19 PM
Registered User
Join Date: Jul 2002
Location: Dallas
Posts: 330
Just a one-time bump back to page one.
Reply With Quote
Old 06-23-2003, 12:40 AM
Registered User
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,784
S/65 sw is above the pan fluid level.
It is a working pressure sw [ meaning it only has pressure/fluid when car is running] and can be changed without draining trans...
Reply With Quote
Old 06-23-2003, 08:21 AM
Posts: n/a
piece of cake to change, I replaced mine last year for the same reason your experiencing, leakage. It probably won't take any more than15 minutes, start to finish to do it.

Good Luck
Reply With Quote
Old 06-23-2003, 08:48 AM
Registered User
Join Date: Jul 2002
Location: Dallas
Posts: 330
Thanks for the great news!
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 12:51 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page