Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 04-01-2000, 08:38 PM
Registered User
Join Date: Feb 2000
Location: Springfield, MO
Posts: 270
I have a 92 300E. The center console piece (the part with the shift knob, window buttons, etc.) that is Zebrano has cracked with age. I have bought a new center console, but how do I remove the old one and install the new one? Thx

Reply With Quote
Old 04-01-2000, 09:22 PM
Registered User
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
Pull up the carpet that is inside the recess behind the wood. There will be a screw there. Take it out and the wood will pull up.

Donnie Drummonds
1981 280GE SWB
1987 16V
Reply With Quote
Old 04-01-2000, 09:37 PM
Registered User
Join Date: Feb 2000
Location: Springfield, MO
Posts: 270
I don't understand when you are referring to the carpet.... Where exactly is this carpet you are talking about?
Reply With Quote
Old 04-01-2000, 11:18 PM
Larry Delor's Avatar
What, Me Worry?
Join Date: Jun 1999
Location: Sarasota, Fl.
Posts: 3,114
It ought to be under the area where your armrest is, or where there ought to be an armrest (if you don't have an armrest).


03/83 300D
07/73 280

Reply With Quote
Old 04-02-2000, 12:47 AM
Registered User
Join Date: Mar 2000
Posts: 552
USA MY '92 W124 vehicles were factory equipped with passenger side air bags in place of the previously standard glove box. To partially compensate for loss of the glove box, a locking storage box was situated in the center console (without a carpet trim piece). This box must be removed in order to access the gear selector surround wood trim's retaining screw.

The storage box's two retaining screws are easily visualized with the box's cover panel in the stored position. A small, ratcheting offset screwdriver (e.g., Sears Craftsman - < $9) will provide the speediest removal of the aft screw. With the screws out, the box is lifted vertically and removed. The gear selector surround wood trim is secured aft with one crosshead screw, located medially. The wood trim is then carefully lifted upwards, disconnecting the power mirror & window switches from their underlying connectors. If clearance with the ashtray's door trim is tight or if there is danger of scratching the new wood during installation, then remove the complete ashtray assembly: first, remove the ashtray insert and visualize two crosshead screws securing the ashtray assembly. Remove those screws and carefully withdraw the assembly; disconnect the power harness prior to full removal. Inspect and transfer switches to the new wood trim; new window switches are not expensive so if any of the existing are questionable, now is the time to renew them. Reassembly is simply the reversal of disassembly.

Reply With Quote
Old 04-02-2000, 09:25 AM
Registered User
Join Date: Feb 2000
Location: Springfield, MO
Posts: 270
Thanks for the help. It looks great! However, the ashtray wood, the storage box wood and the wood that goes around the a/c unit etc. Is sunfaded from all of the past years. Now I think I am going to replace that wood as well! I wonder if parts shop can get it for me.. probably.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I remove the center console in a 210? fhmajid Tech Help 2 01-22-2005 01:04 AM
Console removal & service, 74 SL WCF Mercedes-Benz SL Discussion Forum 1 03-21-2004 07:43 AM
300sd center console greasy griddle Diesel Discussion 8 11-19-2003 01:50 AM
Cost to completely replace center console? Zach Maggio Off-Topic Discussion 4 07-12-2003 02:02 AM
How to remove W202 C-Class roof switch console jjrodger Tech Help 4 06-20-2001 03:20 AM

All times are GMT -4. The time now is 05:01 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page