Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 08-16-2003, 11:36 AM
Registered User
Join Date: Aug 2003
Posts: 2
Fuse 7 Blowing on 300e

Fuse no. 7 on my '86 300e blows after about 20 seconds every time I turn on the A/C.

Per the wiring diagram, this fuse provides power to the mono valve, coolant pump, A/C compressor control unit, aspirator blower, and push button control unit.

I have run the fan only in economy mode for several minutes without the fuse blowing. I disconnected the mono valve and associated coolant pump and the fuse still blows. What test procedure are recommended to issolate the cause of the fuse blowing?

Thanks for any suggestions you can provide.
Reply With Quote
Old 08-16-2003, 02:08 PM
Registered User
Join Date: Aug 2003
Posts: 2
Additional info.

When I disconnect the wires from the compressor and run the fan, the fuse does not blow.

Does this indicate the compressor clutch is bad? What should the resistance be at the clutch wire connection?

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 11:14 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page