![]() |
|
|
|
#1
|
|||
|
|||
Sometimes the tach just goes wild. It may peg at max rpm's, or bounce back and fourth. I've installed a new tach amp (round thing on drivers fender), and replaced the original tach with a used one. The problem is the same. I need some help guys. Any ideas? Thanks in advance.
|
#2
|
|||
|
|||
You have a ground problem or loose wire. You will have to check from top to bottom. Do you have a ETM? (electrical troubleshooting manual?)
They are in the CD we offer in Partsshop. ------------------ Benzmac: Donnie Drummonds 1992 500E (very soon I hope ![]() 1981 280GE SWB ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
#3
|
|||
|
|||
try removing the instrument panel .clean the ground connection between the plates holding the various meters after removing the screws.
it worked for me. |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
1993 300D, window mechanism problem | Francoc | Diesel Discussion | 5 | 11-26-2004 12:12 AM |
85 300D Heater problem | JMH | Diesel Discussion | 8 | 11-09-2003 08:00 PM |
83 300D - Intermittent tach operation and cruise control inop | AdvisorGuy | Diesel Discussion | 3 | 07-15-2003 12:33 PM |
300D tach hookup | oldfrt46 | Tech Help | 0 | 07-14-2002 02:48 PM |
77 300D intermittent wipers and AC freon type | Tundra45 | Tech Help | 4 | 08-18-2001 12:44 AM |