99 SLK230 front brakes TQ specs.

[Nektopoli]

Need the TQ specs for the Caliper to mounting bracket bolts and mounting bracket to front hub bolts.

NP

[Nektopoli]

PS. I'm planning to replace the pads and rotor.

NP

[MikeTangas]

Should be 115nm.

BTW, you don't need to remove the calipers to replace the pads. Take a look at the DIY or the Featured Cars tabs at the top of the page, there is a pretty good how-to for pad replacement. You should only have to pull the calipers if you are also replacing the rotors.

[Nektopoli]

Originally posted by MikeTangas
Should be 115nm.

BTW, you don't need to remove the calipers to replace the pads. Take a look at the DIY or the Featured Cars tabs at the top of the page, there is a pretty good how-to for pad replacement. You should only have to pull the calipers if you are also replacing the rotors.

Thanks, but the SLK has floating calipers, and the 1995 E shown in the DYI section has fixed.

NP

[MikeTangas]

Floating, hmmm...then change that torque spec to 90nm, IIRC.

[Nektopoli]

Thanks Mike.

NP