Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 11-14-2003, 04:10 PM
Registered User
 
Join Date: Jan 2001
Location: Charleston, SC
Posts: 93
Console window switch

The 88TE blew the window fuse (H) when my wife pressed on the drivers window switch. I pulled the console, replaced the fuse and moved the switch to the left rear position which then blew the other fuse (G). This led me to belive that the switch was bad. I took the old switch apart and cleaned it with no luck. Bought a new switch from Performance (same p/n) and it does the same thing. If I leave the switch out of the socket or use one of the three good switches in either circuit (rt. front/lft rear, lft front/rt. rear) no fuses fail and everything works.

Should I assume this new switch is bad out of the box or is there a possibility there is another problem (i.e. a short somewhere).

Any ideas would be helpful. The better half is tired of driving around with only two funtional windows.

Thanks,

Ed C.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page