Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 11-21-2003, 11:10 AM
Registered User
Join Date: Dec 2002
Posts: 34
Hydraulic Line Replacement on 300TD?

The oil tank return line for the rear level control system on my '84 300TD has rusted through just above the rear axle carrier. As the clearance between the vehicle body and the axle carrier is minimal, any advice as to the easiest way to replace this 6mm line would be great. If the steel line replacement requires dropping the rear axle carrier, I'm wondering if a section of high pressure flexible hose could be spliced into the low pressure return line?

Thanks for any help

Dave Jonas

'86 300SD 141k mi.
'84 300TD 242k mi.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 12:05 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page