Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-04-2000, 10:52 PM
Wm. Lewallen
Guest
 
Posts: n/a
How can I remove the ignition switch assembly from my 1982 300D-Turbo.I have removed the instrument cluster, the panel above the drivers feet and the 10mm screw that holds the clamp holding the locking rod that locks the steering. Also have removed the 13mm nuts that hold the steering column.(this lowered the steering column,but doesn't seem to help).It seems as if the steering lock rod is hung up in the housing of the steering column.
The key was not working too good so I used WD40 in the lock. Then the key would go in the lock but not turn. It will come out. After much jiggling I got the key to turn and unlock the steering, but it was very stiff. I left it in this position. I have also unplugged the starter switch on the rear of the assembly. I would like to replace the ignition lock tumber If i can get it out, or replace the complete ignition steeringlock assembly.
Now what do I do? Wm. Lewallen-Lex, Ky.
W41532@aol.com

------------------


Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: New prechamber removal tools gsxr Diesel Discussion 24 01-28-2013 09:07 PM
SL Center Consol Removal Window Switch lymlyt Tech Help 0 04-15-2004 01:45 PM
Instrument Cluster Removal & Service, '74SL WCF Mercedes-Benz SL Discussion Forum 1 03-22-2004 09:51 PM
Console removal & service, 74 SL WCF Mercedes-Benz SL Discussion Forum 1 03-21-2004 07:43 AM
3.0 Cyl Head Removal Question - Guide rail Locating Pin removal CE4me Tech Help 4 10-29-2003 05:44 PM



All times are GMT -4. The time now is 11:48 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page