Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-01-2004, 07:28 PM
Registered User
 
Join Date: Nov 2003
Posts: 111
Distributor Interchangeability (450 SEL)

I pulled a Bosch distibutor (0 231 402 002) from a 73 Merc 450 SEL at the junkyd. to use as a spare for my 74 450 SEL. I thought I could put in fresh points, clean the trigger points and then swap it right in. However, they are slightly different. The vacuum
canister on the jkyd unit is much smaller and has one nipple on its
outside. The unit in my 74 has a larger canister with one nipple
on the inside of the canister. Also the cap on the jkyd unit is held on by clips (like the ones on my old Mopars), the the one in my car is held on by 2 screws that you rotate to release the clamps. Looks like it will physically mount the same, but is there anything different between a 73 and 74,( such as one is advanced, one is retarded)?

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page