Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 07-13-2000, 04:35 PM
Posts: n/a
How can I easily test the alarm on my 90 420?
Reply With Quote
Old 07-13-2000, 09:18 PM
Posts: n/a
Roll down the window. Close the door and lock it to activate the alarm. Pull up on the lock inside the car by reaching through the window. When you open the door the alarm should go off. If it doesn't, the alarm may need a few seconds to activate.
Reply With Quote
Old 07-13-2000, 10:42 PM
Posts: n/a
1990 420SEL needs 3 to 4 seconds for the alarm to arm after the door are locked.

Newer cars with the door lock switch on the dash with the LED, need about 10 seconds to arm the alarm.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Thoughts on built-in alarm Jassper Diesel Discussion 15 07-26-2003 06:08 PM
Your input on a 300TD car rebuild??? dmorrison Tech Help 1 02-19-2003 07:56 AM
Time for a car pshibly Off-Topic Discussion 3 12-31-2002 11:14 AM
E500/500E with over 100K miles rpm8100 Performance Paddock 9 12-30-2002 03:46 PM
Discharged lbantay Tech Help 17 02-20-2002 08:35 PM

All times are GMT -4. The time now is 04:15 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page