![]() |
|
|
|
#2
|
|||
|
|||
Since the real OE wires are just that, solid stranded wire, there isn't any resistance drop like American cars. But the spark plug ends are the resistors. There have been 3 different values over the years 1K, 2K, & 5K ohms. At the coil there is usually a 1K ohm resistor. Most of the Bosch aftermarket stuff is Stranded cloth like american junk. The wires (OE copper) themselves rarely go bad but the resistor ends fail & can be replaced by themselves. Beru replacements are OE quality with solid core wires unlike Bosch(even at dealer).
------------------ MERCEDES BENZ MASTER GUILD TECHNICIAN (6 TIMES) ASE MASTER TECHNICIAN 27 YEARS DEALER M.B. Shopforeman 190E 2.3 ITS RACECAR 1986 190E 16V |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
300E spark plug wires | fish4stripers | Tech Help | 8 | 06-25-2004 08:09 AM |
spark plug wire question, trans oil question | Ray Galetti | Tech Help | 4 | 04-05-2004 11:11 PM |
M112 engine spark plug question | roadsession | Tech Help | 9 | 03-28-2004 04:04 PM |
Bosch Spark Plugs for 280SEL 6CYL | M_Anker | Vintage Mercedes Forum | 23 | 02-27-2004 10:56 AM |
Spark plug wire recommendation... | BENZ-LGB | Mercedes-Benz Performance Paddock | 8 | 05-02-2001 04:12 PM |