Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 08-10-2000, 08:48 PM
Registered User
Join Date: Apr 1999
Location: Apex, NC USA
Posts: 176
I was removing the intake piping to access the exhaust pipe on my 603.970 engine. What filth!!! A severe coating of gunk beginning at the egr port. I've a mind to remove the intake manifold from the head and clean it too. The stuff must be 1/8" thick. At least its soft so I don't think any passed throught hte engine yet!

I beleive I will blank off the egr port instaed of just blocking the vacuum tube that operates it.

1991 350 SDL
125,000 miles
Reply With Quote
Old 08-11-2000, 07:28 AM
Posts: n/a
Removing the intake from a diesel and cleaning it is a common thing to do. I have a parts cleaner, you know a "solvent sink", which makes the job not to bad. If you don't have facilities to clean the manifold, it will be a problem.

If you know an automotive machine shop with a Jet Wash safe for aluminum parts, that would be a good way to go.

Good luck,

Larry Bible
'84 Euro 240D, 523K miles
'88 300E 5 Speed
'81 300D Daughter's Car
Over 800,000 miles in
Mercedes automobiles
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Should the EGR valve hold a vacuum? irieite Tech Help 5 10-17-2003 12:04 AM
EGR valve removal & block-off photos gsxr Diesel Discussion 5 12-30-2002 03:40 PM
Valve Stem Replacement - Question?? Corby Diesel Discussion 15 11-03-2001 05:24 PM
Bulletin#CMP95_0131 - EGR Valve Replacement hancheng Tech Help 12 04-26-2001 06:33 PM
EGR valve redoux clmiller Diesel Discussion 2 04-24-2001 12:45 AM

All times are GMT -4. The time now is 03:39 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page