|
|
|
|
|
#1
08-15-2000, 07:19 PM
|
|||
|
|||
|
1987 260e (w124)
When I press my A/C recirc switch the light comes on but nothing happens, all other a/c and heat functions work ok, I pulled the glove box out and I think the actuator may have a leaky diaphram, I can see the back of it, but most of it is behind the a/c box, can this be gotten to without removing the dash, does it turn like the one on the side for the defrost vents? I did have a bad diaphram there too. Richard MBCA member 1987 260e (w124) 
|
|
#2
08-15-2000, 09:34 PM
|
|||
|
|||
|
Most of the actuators are the turn type. I'd use a vacuum pump/guage to check the diaphram before removing it..
------------------ Benzmac: Donnie Drummonds 1991 GMC Syclone ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| A/C, Air recirculation 300E, Please HELP !!! | public enemy | Tech Help | 7 | 06-16-2006 02:08 AM |
| Access to A/C recirculation actuators | cjscopp | Tech Help | 6 | 01-13-2006 08:24 PM |
| A/C vacuum actuator diaphram part numbers | H-townbenzoboy | Diesel Discussion | 8 | 04-20-2004 10:42 AM |
| Bad odor from A/C and Refrigerant leakage | Holson Adi | Tech Help | 5 | 01-17-2003 02:00 PM |
| A/C recirculation mode | hancheng | Tech Help | 7 | 01-19-2000 09:10 AM |
Linear Mode
