|
|
|
|
|
#1
08-25-2000, 05:02 PM
|
|||
|
|||
|
I've got an '85 300CD/T with 74K miles, purchased recently from family. I've noticed as of late that my temperature gage will, intermittantly, not register temterature. Some times it will work fine, yet other times it will not come on at all during a drive. Should I look for a loose connection, and at which end? Also, where is the sensor located? Any help would be appreciated!
|
|
#2
08-26-2000, 03:42 PM
|
|||
|
|||
|
HyperKyper,
Check the connection at the temperature sensor in the left side of the block adjacent to the injection pump. Rotate the connector on its terminal. It very well could be slightly corroded. Good luck, ------------------ Larry Bible '84 Euro 240D, 523K miles '88 300E 5 Speed '81 300D Daughter's Car Over 800,000 miles in Mercedes automobiles
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| fuel gage and temperature gages stopped working on 92 190E | vterry | Tech Help | 3 | 07-28-2003 02:15 PM |
| Outside Air Temperature Gage Dead | Quist1 | Tech Help | 1 | 11-08-2001 08:19 PM |
| Is this normal from a temperature perspective ( W123)? | 79300D | Tech Help | 1 | 08-09-2001 11:28 AM |
| temperature gage problem solved | mbzowner | Tech Help | 0 | 06-16-1999 01:02 PM |
| Temperature gage problem | mbz owner | Tech Help | 0 | 06-14-1999 02:27 AM |
Linear Mode
