|
|
|
|
|
|
#1
|
|||
|
|||
|
Hi, The right rear power window in my 300TE stopped working recently. After taking the door panel off, I hit it with a hammer and it worked for awhile but got hot. Any advice?
Thanks, Carl |
|
#2
|
||||
|
||||
|
You can try to straighten and lubricate the rails but, most likely the motor is on its last leg. I had to changed mine, after trying different things.
Good luck! J.H. 300E |
|
#3
|
|||
|
|||
|
Also keep in mind during those years there was a lot of broken wires within the door hindge. Hold the switch in one direction or the other and open/close the door at the same time. You may have moved the door enough to contact wires by hitting it with a hammer
------------------ Mercedes-Benz Master Guild - 2 years Shop Foreman - 20 + years - dealer. 2000 SL500 1995 E320 1989 300SE |
|
#4
|
|||
|
|||
|
Nothing better than a good scientific approach to trouble shooting
. Does the window not operate with either switch, i.e. the front or rear. If it works from the rear and not the front, replace front switch and vice versa.------------------ Jeff Lawrence 1987 300e 1989 300e 2000 Dodge Grand Caravan SE |
![]() |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| ML 320 2000 power window switch and door power lock | serge | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 7 | 01-09-2005 07:07 AM |
| ML320 power window problem | johng_22 | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 4 | 08-13-2003 06:57 PM |
| Dead power window - 300e | jkmmrs | Tech Help | 3 | 07-03-2003 11:00 PM |
| 300e power window problems | brockley | Tech Help | 2 | 07-03-2002 09:12 PM |
| power window trouble shoot | 300DGREY | Tech Help | 1 | 03-21-2002 10:44 AM |