|
|
|
|
|
|
|
#1
09-06-2000, 09:19 PM
|
|||
|
|||
|
As both previous posts from Benz technicians show, you probably have metal in system from original compressor failure. Many times the flakes of metal do stick in hi-press rubber hose & sometimes in the condensor. FLUSHING doesn't remove this type of debris. The best way to see if there is metal in system is to remove drier & use an exhaust chain cutter to open the drier to see if there is metal from compressor inside of it.
------------------ MERCEDES BENZ MASTER GUILD TECHNICIAN (6 TIMES) ASE MASTER TECHNICIAN 27 YEARS DEALER M.B. Shopforeman 190E 2.3 16V ITS SCCA racecar [This message has been edited by M.B.DOC (edited 09-06-2000).] 
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| A/C compressors, is there something better? | Astroman | Diesel Discussion | 38 | 07-23-2004 06:18 AM |
| FS A/C Compressors | congonatty | Mercedes-Benz Used Parts For Sale & Wanted | 0 | 06-06-2004 09:23 AM |
| Winters over and A/C season begins | pdxman | Diesel Discussion | 7 | 03-13-2004 01:38 PM |
| Questions about ABS and A/C compressors. | pezzy | Tech Help | 2 | 11-15-2000 09:52 PM |
| A/C Compressors | David Pare' | Tech Help | 1 | 11-03-2000 02:54 PM |
Hybrid Mode
