The part number is: 124 350 6506 Do I need to have a machine shop press this part in? I got a list from a local indie mechanic and it has 4 parts listed.
1243500129
1243506506
1243506806
2013505606

The second one listed is the part that I have the question about. The others are typical parts that one replaces when working on the rear suspension of a 300E. The car has the L/R wheel in particular leaning in at the top. Does anyone have any tips for redoing the rear suspension of a w124?
Thanks
David

__________________
_____________________________________________

2000 Honda Accord V6 137k miles

1972 300SEL 4.5 98k miles

_____________________________________________

That number is the bolt mounting kit for the "camber" link.

Are you refering to 210-352-00-43, reducing sleeve? You can tap that sleeve in with ball-peen hammer.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

I got one bolt set from lemforder, but I had to order 124 350 6506 from the dealership.
Thanks
David

__________________
_____________________________________________

2000 Honda Accord V6 137k miles

1972 300SEL 4.5 98k miles

_____________________________________________