|
|
|
#1
|
||||
|
||||
w107 rear brake caliper problem
I removed the right rear brake caliper to install a new one.
When I got back, I noticed...duh...the car had rolled off the jack stand. After getting the car back up, I noticed the flange which holds the nuts for mounting the caliper was damaged. Now I cannot bolt the caliper back on because the nuts do not line up w/ the rest of the assembly. I have to replace this flange. Does this mean I have to pull the axle/half shaft to get at the bolts holding the flange on? Does anyone know the part number for this flange? Better yet, any help would be appreciated!
__________________
1988 560SL "BLTZKRG" 1992 300CE "VRIL 1"
|
#2
|
||||
|
||||
I'm not sure about the flange. But it does concern me about the "rolled off the jack stand" I'm concerned about your safety, setup and working on the car. A car should not Roll off the stands. You could have been hurt or killed. Buy some good jackstands and wheel chalks. We don't need to hear about your accident or untimely death.
Dave
__________________
1970 220D, owned 1980-1990 1980 240D, owned 1990-1992 1982 300TD, owned 1992-1993 1986 300SDL, owned 1993-2004 1999 E300, owned 1999-2003 1982 300TD, 213,880mi, owned since Nov 18, 1991- Aug 4, 2010 SOLD 1988 560SL, 100,000mi, owned since 1995 1965 Mustang Fastback Mileage Unknown(My sons) 1983 240D, 176,000mi (My daughers) owned since 2004 2007 Honda Accord EX-L I4 auto, the new daily driver 1985 300D 264,000mi Son's new daily driver.(sold) 2008 Hyundai Tiberon. Daughters new car |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|